|
C-TEC Industries, Inc
proposes to provide the following services per Manufactures
Recommendation and ANSI Standards |
|
Lubricate |
|
1. Inspect & grease all fittings
4. Inspect & grease hinges & pivot points |
|
2. Inspect & grease all ratchets
5. Inspect & grease turn buckles |
|
3. Inspect & grease platen or ram guides
6. Inspect & grease motor |
|
|
|
Structure |
|
7. Inspect welding on chute & enclosures |
|
8. Inspect anchor bolts on container guides & stops |
|
9. Inspect body for cracks or integrity breaches |
|
10. Inspect for leaks & debris at rear access panel & main door
seals |
|
11. Inspect breaker bar |
|
12. Inspect floor & hopper sides |
|
13. Inspect wiper & hold back teeth |
|
14. Inspect rails & fire chute doors |
|
15. Inspect platen or ram guides |
|
16. Inspect ram |
|
|
|
General |
|
17. Inspect options. |
|
18. Inspect equipment esthetics |
|
|
|
Hydraulics |
|
19. Inspect oil level and clarity |
|
20. Inspect system for leaks |
|
21. Inspect couplers |
|
22. Inspect hoses and fittings |
|
23. Inspect external hydraulic filter |
|
|
|
Check Operation |
|
24. Check reverse/forward button.
28. Check timer |
|
25. Check cycle function
29. Check control lights |
|
26. Check magnetic interlock
30. Check stop/start button |
|
27. Check pressure gauge.
31. Check & clean photo eye & reflector |
|
|
|
Safety |
|
32. Check for ANSI compliance and decals |
|
33. Check for code violations. |
|
34. Check for any obvious unsafe conditions in the
compactor/baler area. |
|
|
|
Electrical |
|
35. Inspect connections. |
|
36. Inspect conduit/seal tight. |
|
37. Inspect switches and electrical disconnect box |
