Key Features:

Typical Specifications: 24″ diameter Linen Chute

Chute Material: The chute is fabricated of 16 ga. U.S. Aluminized steel, optional Stainless-Steel Chute and fittings are available.

Intakes: 21″ wide x 21″ High Stainless Steel, Self-Closing, positive latching, side hinged, hand operated doors bearing 1-1/2-hour 250-degree U.L. “B” Label. The intake door has 180-degree swing operation and is furnished with removable stainless steel door trim with embossed letters (Soiled Linens).

Discharge: Type H Hopper with 24″ Wide x 30″ High, top hinged, counterbalanced stainless steel door bearing 1-1/2-hour 250-degree U.L “B” Label with fusible link. Reinforced bottom with 13 ga. impact plate. Hopper is supported with a 2″ Pipe pedestal and equipped with 2″ IPS Drain Flange for connection by plumber.

Vent: Provide full diameter vent 4′-0″ above the roof with metal explosion cap.

Floor Frames: Fabricated Floor frames of 1-1/2″ x 1-1/2″ x 3/16″ angles and 1-1/2″ x 3/16″ Bar stock welded assembly.

Sprinklers: 1/2″ IPS 165-degree sprinkler head with shield above top intake. Additional 1/2″ Sprinklers and shields at every second intake (or as required by code) 1/2″ IPS Flushing spray head centered in chute above top intake ready for connection by plumber.